Miscellaneous accessories

Miscellaneous accessories to enhance your UAV's possibilities

Product Image Item Name- Price
Butterfly screw M5x15

Butterfly screw for hand screwing. Perfect fit for YellowScan Surveyor.

6,95€


Futaba PPM cable for Connex Ground Unit

This cable allows to connect a Futaba radiocontroller via PPM to an Amimon Connex Ground Unit....

8,95€


Futaba SBUS cable for Connex Ground Unit

This cable allows to connect a Futaba radiocontroller via SBUS to an Amimon Connex Ground Unit....

15,95€ 9,95€

Save: 6,00€

microSD to SD adapter

Allows to insert a microSD card in a SD port.

1,95€


Cap for GPS-Cover 64

This is an alternate cover for the "GPS-cover 64" (if one does not use MKGPS). The...

1,95€


Micro-SD 2GB memory card class 10

Micro-SD memory card. This card is perfect for the flight recorder of your MikroKopter...

9,95€


Set of 4 Velcro straps - 130mm

Set of 4 Velcro straps to attach your battery or any other accessory on your drone. Also usefull...

2,99€


Set of 4 Velcro straps - 200mm

Set of 4 Velcro straps to attach your batteries or any other accessory on your drone.

3,99€


Set of 4 Velcro straps - 330mm

Set of 4 Velcro straps to attach your batteries or any other accessory on your drone.

4,49€


Pink fluo tape - 48mm / 25m

Strong decorative gaffer tape reinforced by cloth fibers. This tape has a high adhesive...

30,14€


Green fluo tape - 48mm / 25m

Strong decorative gaffer tape reinforced by cloth fibers. This tape has a high adhesive...

31,66€


Black circular double sided tape (diam. 30 mm)

This double sided round tape allows to fix a Here3 GNSS receiver to a mount, by example.

0,95€


Molex cable for MKGPS or Flight-Ctrl (5 contacts)

Cable with Molex connectors (5 contacts) to connect the MKGPS with the NaviCtrl or the Flight-Ctrl ...

4,95€


3-pin JST-GH 1.25mm connector male

JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.

0,55€


4-pin JST-GH 1.25mm connector male

JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.

0,59€


6-pin JST-GH 1.25mm connector male

JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.

0,65€


 Temporarily out of stock 
8-pin JST-GH 1.25mm connector male

JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.

0,75€


Molex connector - 5 contacts SMD

Molex SMD connector - 5 poles. This connector is to be soldered on the Power Distribution Boards....

1,95€


Buzzer

Buzzer (spare part for the FlightCtrl).

3,49€


Shutter cable

This is a small circuit board (pre-assembled) to trigger a camera that has an external trigger...

19,99€


Panasonic shutter cable

This is a small circuit (pre-assembled) to trigger Panasonic cameras. The Shuttercable can be...

10,95€