Miscellaneous accessories

Miscellaneous accessories to enhance your UAV's possibilities

Displaying 1 to 21 (of 101 products)

Show All 1 2 3 4 5

Product Image	Item Name-	Price
	Butterfly screw M5x15 Butterfly screw for hand screwing. Perfect fit for YellowScan Surveyor.	6,95€ More
	Futaba PPM cable for Connex Ground Unit This cable allows to connect a Futaba radiocontroller via PPM to an Amimon Connex Ground Unit....	8,95€ More
	Futaba SBUS cable for Connex Ground Unit This cable allows to connect a Futaba radiocontroller via SBUS to an Amimon Connex Ground Unit....	15,95€ 9,95€ Save: 6,00€ More
	microSD to SD adapter Allows to insert a microSD card in a SD port.	1,95€ More
	Cap for GPS-Cover 64 This is an alternate cover for the "GPS-cover 64" (if one does not use MKGPS). The...	1,95€ More
	Micro-SD 2GB memory card class 10 Micro-SD memory card. This card is perfect for the flight recorder of your MikroKopter...	9,95€ More
	Set of 4 Velcro straps - 130mm Set of 4 Velcro straps to attach your battery or any other accessory on your drone. Also usefull...	2,99€ More
	Set of 4 Velcro straps - 200mm Set of 4 Velcro straps to attach your batteries or any other accessory on your drone.	3,99€ More
	Set of 4 Velcro straps - 330mm Set of 4 Velcro straps to attach your batteries or any other accessory on your drone.	4,49€ More
	Pink fluo tape - 48mm / 25m Strong decorative gaffer tape reinforced by cloth fibers. This tape has a high adhesive...	30,14€ More
	Green fluo tape - 48mm / 25m Strong decorative gaffer tape reinforced by cloth fibers. This tape has a high adhesive...	31,66€ More
	Black circular double sided tape (diam. 30 mm) This double sided round tape allows to fix a Here3 GNSS receiver to a mount, by example.	0,95€ More
	Molex cable for MKGPS or Flight-Ctrl (5 contacts) Cable with Molex connectors (5 contacts) to connect the MKGPS with the NaviCtrl or the Flight-Ctrl ...	4,95€ More
	3-pin JST-GH 1.25mm connector male JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.	0,55€ More
	4-pin JST-GH 1.25mm connector male JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.	0,59€ More
	6-pin JST-GH 1.25mm connector male JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.	0,65€ More Temporarily out of stock
	8-pin JST-GH 1.25mm connector male JSTGH connector used for the Pixhawk 2 cables for example. It requires an adapted crimping tool.	0,75€ More
	Molex connector - 5 contacts SMD Molex SMD connector - 5 poles. This connector is to be soldered on the Power Distribution Boards....	1,95€ More
	Buzzer Buzzer (spare part for the FlightCtrl).	3,49€ More
	Shutter cable This is a small circuit board (pre-assembled) to trigger a camera that has an external trigger...	19,99€ More
	Panasonic shutter cable This is a small circuit (pre-assembled) to trigger Panasonic cameras. The Shuttercable can be...	10,95€ More