The TBS CORE power supply module is an essential accessory if you want to have a quality stabilized current to power your camera and video transmitter.
The TBS CORE provides power either in 5V or 12V being supplied from the main battery (voltage input can be between 2S and 10S).
This module is able to provide up to a current of 2 amperes at 5 volts or up to 600 mA at 12 volts. The output should be chosen between 5V or 12V (cannot be simultaneous).
This module greatly simplifies the installation of the hardware on your TBS FPV quadrirotor.

• Input: 2 x 2S - 10S (OSD measures up to 6S)
• Output: Constant 5V @ max. 2A OR 12V @ max. 600mA (individually, not in combination)
• Dimensions: 34 x 25mm
• Weight: 6.6g
• Switching power with >85% of efficiency
• OSD with optional current sensor, RSSI and input battery voltage display
• 1m shielded cable included
• 1 x Video, 2 x Audio pass-through
• Suggested setup is 1x main battery and 1x 2S 300mAh backup (will provide video for about 30min)
• Output power limitation protects your equipment in case of reverse polarity
• Extremely low ripple and low RF noise
• 1W VTX requires minor airflow

• 1 Power module

• User manual