Our CineStar 6 frame kit, foreseen with 450mm booms comes ready to be assembled.

It is designed to receive the complete MikroKopter electronics set and powered by 8 motors (not included in the kit) on a flat configuration.

Thanks to its innovative anti-vibration system, the CineStar airframe optimally isolates the camera mount from the vibrations generated by the motors, improving the video shooting.
The mounting plate of the gimbal is very practical and can be easily disassembled to make easier the transportation of the aircraft. The booms of the airframe can also be removed conveniently for a convenient carriage, airfreight etc.

The battery is placed above the rest of the frame, improving the center of gravity which directly benefits to ameliorate the flying behavior of the drone.
The GPS and the navigation control board, can be mounted on a special holder, away from the rest of the electronics and so from electromagnetic interferences, ensuring an optimum GPS reception and compass operation.

The landing gear provides high rigidity, which is essential in a large aircraft like the CineStar.





Scope of Delivery:

• 2 pcs. Center hub (press nuts installed)
• 6 pcs. Landing gear assembly (press nuts installed)
• 1 pcs. Lipo battery tray
• 1 pc. Camera mount attachment plate
• 8 pcs. Motor mount plates (press nuts installed)
• 2 pcs. "Dog bone" GPS mount washers
• 12 pcs. Cut carbon fiber for Vibration dampening brackets
• 25 pcs. Silicone dampeners
• 72 M3x6mm pan head screws
• 9 M3x8mm pan head screws
• 9 M3x10mm pan head screws
• 49 M3x40mm button head screws
• 41 M3x35mm button head screws
• 9 x12mm Standoffs
• 4 x 50mm Hex stand off bolts
• 82 Frame clamps
• 8 x 450mm Carbon fiber booms