The Cube Black+

The Cube Black+

Price: 249,00€

Price without tax: 205,79€
 Temporarily out of stock 

To be notified when this product is back in stock please complete the form here below.



AltiPointsYou'll win 290 AltiPoints by buying this article.
  • Model: CUBE_BLACK+ (42621)
Description

Cube Black+ - Contrôleur de vol Open Source

New: Cube Orange with more powerful processor is now available.

The Cube Black plus (Pixhawk 2.1) is a slightly modified version of the Cube Black.

More than a simple flight controller, Cube is a solution suitable for countless unmanned systems including multirotor drones, planes, helicopters, VTOL aircrafts, boats, cars, uboats, etc.

THE CUBE

The most important improvements of this second Pixhawk version can be found in the CUBE.

Indeed, it embeds quality technological modules offering several features like a high performance IMU. The CUBE embeds a triple redundant IMU that is isolated, dampened and includes a heating system. Thanks to that, the Pixhawk 2 is a controller suitable for operations below freezing point.

In addition to that, the CUBE is connected to the carrier board with just a DF17 connector. This means it is a modular system.

Key features

  • Same processor as Cube Black
  • Different sensors
  • CUBE modular design
  • dampened and isolated IMU
  • triple redundant IMU
  • Suitable for numerous platforms
  • CM precision GPS
  • Multiple GPS
  • Open source development


Technical specifications

  • Cube Black+ (PixHawk 2.1)
  • IMU:
    • 3 x accelerometers (ICM20948, MPU9250, ICM20602)
    • 3 x gyroscopes (ICM20948, MPU9250, ICM20602)
    • 2 x magnetometers (ICM20948, MPU9250)
    • 2 x barometers (MS5611)
  • IMU dampened and isolated
  • IMU temperature controlled
  • SD card slot
  • micro-USB interface
  • Size: 38 x 38 x 22 mm
  • Weight: 34 gr
  • Connection: DF17 with 80pins
    • 2 x CAN (pins reserved for a 3rd Can bus on next years model)
    • 2 x I2C
    • 5 x Serial (1 reserved for debug)
    • 2 x SWD debug ports
    • 2 x Power input V+I
    • 1 x Analog input (one of the power inputs can be used as analog if needed)
    • Buzzer raw pwm
    • Safety switch
    • 8 x I/O connected PWM out (solder option for 3.3 or 5V levels, default 3.3) opto drive capable 10mA
    • 6 x AUX FMU connected I/O (PWM or alernate function)
    • Servo rail I/O backup power (10.5V max)
    • 2 x 5.4V power in pins


Scope of delivery

  • 1x The Cube Black+


Links


Notes

  • The Cube can not be delivered to Ukraine and Iran.
  • A screw kit is necessary to fixe the Cube on the Mini Carrier Board or the Kore Carrier Board.

Announcement: For ArduCopter users, it is necessary to run at least ArduCopter 3.6.11 and to use the parameters from SB2:

  • BRD_TYPE == 3
  • EK2_IMU_MASK == 7 (or EK3_IMU_MASK == 7 if EKF3 is used)
  • INS_USE == 1
  • INS_USE2 == 1
  • INS_USE3 == 1



Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when the article: The Cube Black+ is back in stock.

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!





Customers who bought this product also purchased...