Description
The Cam-CTRL Multi Servo is a control board to control cameras and video cameras by using your RC receiver, This module supports the new SONY Multi-Interface.
The Cam-CTRL can be connected to the flight controller (Flight-Ctrl) or used stand alone via an RC receiver.
The camera will start recording via a switch on your remote control and will continue until this switch is turned back to OFF.
This makes the recording much more effective rather than operating it through a start/stop button via the IR port.
This version is smaller and lighter with direct video output connector (with Molex connectors).
Important: This module is foreseen with a Multi connector, present on Sony video cameras since year 2013.
The following functions can be used:
-
REC Start/Stop
-
Trigger photos
-
Zoom-in & out (variable speeds - from very slow to very fast)
-
Automatically switch on the camera
-
Switch modes (picture to video and vice versa)
-
Avoid camera Sleep-mode
-
PAL output (only the camcorders with LANC have PAL)
-
External status LED can be connected
-
Take pictures while filming (if the camera has this feature)
Besides these functionalities, the Cam-CTRL usefully shows the status of the camera and transmits it to the drone (functionality available with MikroKopter flight controllers). This means that a camera-status symbol is displayed in the Graupner-HoTT, Jeti or MKTool telemetry:
-
Camera ready (symbol: C)
-
REC active (symbol: R)
-
Zoom active
-
Number of pictures shot (indication: 0-9)
-
Camera is off (or battery is empty) (symbol: !)
-
Camcorder is in Photo-Mode and can't capture videos (symbol: P)
-
Cable to camera disconnected (symbol: ?)
Technical specifications
-
Weight: approx. 14g with cables
-
Dimensions: 30 x 16 mm
-
LANC - cable length: approx. 12 cm
-
Servo cable length: approx. 12 cm
-
Angle: 90° right
Scope of delivery
-
1 x Cam-Ctrl shutter with cables
Links
Notes
-
Triggering pictures while filming with the Cam-Ctrl is possible if your camera has its feature by itself.
-
We invite you to help expand the compatibility list by sharing info on any new device successfully tested.
Compatibility
-
Sony Alpha A5000/A6000, Alpha A6300, Alpha 7, Alpha 7R
-
Sony RX100
-
Sony HX60V, HX90V, HX400V
-
NEX-3N
-
HDR CX410
-
HDR-PJ650
-
HDR-PJ780
-
HDR-PJ660E
-
HDR-PJ790E
-
HDR-PJ820E
-
FDR-AX33