Radio Telemetry Kit (B) for PixHawk (with Bluetooth) - 433Mhz

Radio Telemetry Kit (B) for PixHawk (with Bluetooth) - 433Mhz

Price: 79,95€

Price without tax: 66,07€
Quantity:

Max: 2
Available in our stock


AltiPointsYou'll win 93 AltiPoints by buying this article.
  • Model: XROCK_433MHZ_TELEMETRY_KIT_BT (42593)
Description

This telemetry kit 433MHz for Pixhawk allows to establish a wireless connection between a drone and a ground device (tablet, smartphone, computer, etc.). This kit is based on open source software as an alternative to Xbee radios as offering better performance for a more competitive price.

The kit includes one serial board module to mount on your drone and one USB or Bluetooth to connect to your computer or tablet on the ground.

The system provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source firmware.  The interface to the module is done via a standard 5V TTL serial / FTDI USB serial connection or direct USB.

The SiK firmware includes a bootloader that allows radio firmware upgrades over the serial interface, and radio firmware with configurable parameters.

Firmware upgrades and configuration are fully supported in the ArduPilot APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.


Technical specifications

  • Frequency: 433MHz
  • Power -up to: 20dBm (100mW)
  • Baud rate (default): 57600
  • Range: jusqu'à 800m
  • Protocole MAVLink 1 and 2
  • Open source software
  • AIR module weight (with antenna): 23 g
  • Size (without antenna): 49 x 25 x 13 mm
  • Connectivity: Serial and USB
  • Working voltage: 3.7 - 6V DC
  • GROUND module weight (with antenna): 44 g
  • Size (without antenna): 63 x 41 x 15 mm
  • Connectivity: USB and Bluetooth
  • Integrated battery: 3,7V (LiPo) 800mAh
  • Charging voltage: 4.5 - 5.5V


Scope of delivery

  • 1 x Air module
  • 1 x Ground module
  • 2 x Antennas
  • Cables for plugging to Pixhawk 2 Cube, Pixhawk and APM


Links


Notes

  • Purchasing and using this material is not allowed in several countries. In some cases, it requires a license, in some other cases it is simply forbidden. In case of doubt, we recommend you not to purchase this module.


Diagram

AIR module
Pin (from left to right under USB) 1 2 3 4 5 6
Color Red Black Black Black Black Black
Pixhawk 2 "Cube" side Vcc TX RX CTS RTS GND