This is a small circuit (pre-assembled) with Multi socket down angled to trigger Sony cameras like the following: A5000, A5100, A6000, A7, A7R, RX100 I, RX100 II and RX100 III.
The Shuttercable can be connected to one of the transistor outputs of the FlightCtrl through a switch operated via a servo output or the optocoupler part of this shutter.
To shut, you just need to connect together the "shutter" (red) + the "focus" (white) and the "ground" (black) wires (see picture below).
In order to use this cable with the standard shutter on an output of the MikroKopter Flight-Ctrl, you need to connect:
1. the red wire and the white wire of this Sony shutter on the "Out+" connection of the standard shutter
Scope of delivery
2. the black wire of this Sony shutter on the "Out-" connection of the standard shutter
This cable is not made to operate directly connected to a radio-controlled receiver output, nor to any other component working with PPM/PWN signal.
This cable is a shutter (for shooting pictures). It is not foreseen to start or stop the video, nor to vary the zoom.