This powerful battery charger and balancer CQ3 allows the charge of 4 x 6S LiPo batteries on the same time (4 x 100Watts). The 4 batteries are charged and balanced completely independently.

The Q6AC charger is directly connected to the mains power (110V or 220V) but can also operate via a car battery on the field (12V).

This battery charger allows to quickly charge/discharge 4 Lithium-Polymer (LiPo) battery packs up to 6S each and with a maximum current of 4 x 10A (max 100W).

Highlights

• Microprocessor controlled
• 110V or 220V input power
• Delta-Peak sensitivity
• Storage function
• Charge time limit function
• Input voltage monitoring (avoids car battery from being too discharged)
• Battery pack memory
• Balance plug type JST_XH (the most used in the battery market)
• Delivered with a set of different charge cables

• Operating voltage range: 220V AC and also DC 11-18 Volts
• Charging Circuit power: Max 4 x 100W
• Max 4 x 10W for discharging
• Charge current range: 4 x 0.1-10A
• Discharge current range: 4 x 0.1-5A
• Current drain for balancing Li-Po: 400mAh/cell
• NiCd/NiMH battery cell count: 1-15 cells
• Lithium accepted battery types: LiPo, Li-ion, LiFe
• Lithium/Polymer battery cell count: 1-6S (x 4 packs)
• Pb battery voltage: 2V - 20V
• Dimensions: 220 x 240 x 68mm
• Weight: 1750g

• 1 Charger
• Cables and connectors
• 4 balance JST-XH cables
• 1 User manual

• The color of the charger may be different from the one shown on the picture.